Wednesday, February 24, 2010

Marine airbags -Interview with Evergreen Maritime (1)

What were the first uses of marine airbags in the launching of ships?
People can trace the history of airbag ship launching back to 1981 year,over 20 years ago. Xiao Qinghe ship repair and building shipyard,located in Jinan city of Shangdong Province, launched a 60 DWT tank barge with marine airbags on Janu. 20, 1981. Seven marine airbags were employed in that ship launching project,one is 2 meters in diameters and 6 meters long used for elevating and the left six air bags are 0.8 meter and 6 meters long act as the rollers. The initial intention of that ship launching trial is for warfare purpose to develop a prompt,less landform limited ship launching method.

How has the technology advanced since then?
During the past over twenty years, the marine airbag ship launching system make progress not only the airbag but also the ship launching/landing technology.
The first generation airbags use rubber dipped canvas as reinforcement layer , the trunk and two cone-shaped ends are made separatelly. People lapping rubber and dipped canvas to form the air chamber trunk and stick strips to molds to make the air bags’ ends ,then stick them together.
The latest marine airbags use the rubber dipped synthetic-tyre-cords as the reinforcement layers and take the whole-enlacing-technology for manufacture. The trunk and two cone-shaped ends are made at the same time and enlaced together so the whole air bags have no joints. Due to the development of rubber chemistry the performance of rubber employed in the latest air bag is highly enhanced also. The performance of the latest airbag is 15 times of the first generation one with the same specification.
Regarding the launching/landing technology, it developed most during the past 20 years. From the beginning, only small and flat bottom ship located in fabricated slope can be launched with air bags. And now this technology is more flexible and less limited by the ship and landform. Any type of ship DWT below 55,000 at a place with enough launching space to the water can be launched with air bags. And the launching slope even can be aclinic. The air bag ship landing technology developed from applications in some stranded ship salvage projects and then it comes into a cutting edge one especially useful for some marine emergencies.
http://www.evergreen-maritime.com

Sunday, February 21, 2010

Malaysia says first submarine unable to dive

Kuala Lumpur: Malaysia's first submarine, a European-made Scorpene delivered last September, has developed problems that make it unfit for diving, the defence minister said Thursday.

The KD Tunku Abdul Rahman sailed into a grand reception last year as the first of two commissioned from French contractor DCNS and Spain's Navantia for a total of 3.4 billion ringgit (961 million dollars).

Named after the country's first prime minister, it was hailed as an important acquisition despite opposition allegations of corruption in the deal.

"The submarine can still dive but when we detected the defects, we were advised that it should not dive," Defence Minister Ahmad Zahid Hamidi told reporters.

"The (parts found with) defects are still under warranty so the supplier and contractor are repairing them," he added.

Navy chief Abdul Aziz Jaafar said a problem first emerged in the submarine's cooling system last December. After being fixed, another defect was identified in a different system last month.

"We hope it can dive again after February 18 so we can carry out the tropical water trials," Abdul Aziz told reporters.

The navy chief said the second submarine, the KD Tun Razak which is named after the nation's second premier, is expected to arrive from France on May 31. It was originally scheduled for delivery in late 2009.

The two submarines have attracted controversy since the deal was signed in 2002.

Malaysia's opposition claims that a 540-million-ringgit commission was paid to a close associate of Prime Minister Najib Razak in brokering the contract.

Najib has denied there was any corruption in the deal, which was made when he was defence minister.


---------------------------------------------------------------------------------SOUNDS LIKE A JOKE,,,

Friday, February 19, 2010

DWT 58,000 Cargo Ship Launching with Evergreen Marine Airbags




On 1 Feb. 2010 Qingdao Eversafe Marine Engineering Company (www.eversafe-marine.com) flawlessly launched a DWT 58,000 cargo ship with Evergreen airbags in Zhejiang China and this launching project sets the new world record of airbag ship launching.
This cargo ship holds 11,800 tons is 199 meters long and 32 meter wide. It is built on a 0.87 degree concrete ramp whose end is a sluice gate. From the water gate to ship’s stern is 15 meters and the water beyond the gate is 8 meters deep. Total 76 pieces Evergreen airbags are employed to complete this project and also two 25 tons winches.
For big ship launched with marine airbags, the scientific design from calculation is vital for success. To ensure this DWT58, 000 cargo ship’s safe launching, there are two conditions must be satisfied first: avoiding the “bow decline” during the launch process and the rush distance is controllable when ship is after launch.
Evergreen experts are gathered to calculate the launching project of the largest ship ever be launched by marine airbags. From mathematic modeling to computer simulation every step of launching process are researched carefully. From the water level to weather variety most conditions are considered for the design. When settle the arrangement of marine airbags Evergreen engineers find the stern rope must be added to control the rush of ship after launch. So 4 stern ropes are demanded to fix on the bollard of a floating dock with 45 degree angle to the ship and the time of cast anchor is also stated.
At 31 Jan. Qingdao Evergreen Maritime completed the ship raise and most block remove work. At that time two winched pulled ship from slipping and the blocks under stern remained. The highest tide of 1 Feb. is estimated to occur at 10:30 AM, so launch time is decided to be 10 AM. At 9:30 am Evergreen team began to adjust the inner pressure of airbags at stern to be 0.12Mpa and then released the steel ropes from winches. At 9:50 airbags under gravity center and bow were inflated to be 0.15Mpa then the ship began to move slowly by riding rolling airbags. During the launch process the ship’s incline angle is increasing until the stern floated when the bow enters into deep water already. There is no “bow decline” phenomena occurred just as forecasted by calculation.
When ship advanced in the sea for a certain distance its bow anchors was casted and four stern ropes were trained. So ship moved sideways then it was pushed by two tug boats to mooring.
The success of DWT 58,000 ship launched with Evergreen airbags not only creates a world record of airbag ship launching but also means the airbag ship launching technology reaches a new altitude. Evergreen Maritime is devoted to the marine airbags’ manufacture and launching technology development for more than 10 years so he achieves today’s accomplishment.
Qingdao Evergreen Maritime is never satisfied and forever on the go.

Evergreen airbags successfully launched a 32,500DWT Bulk Carrier


On 16th.Jan.2010, the 32,500DWT Bulk Carrier “NO. 6 Dongze” was successfully launched by Evergreen ship launching team with Evergreen Marine Airbags in Nanjing Dongze Shipyard. It is the sixth ship launched by Qingdao Evergreen Maritime Company using airbag launching technology for this shipyard.
This Bulk Carrier with 210 meters length and 34 meters molded breadth weight 9,500 tons. January is the dry season of the Yangtze River Valley, so there is long distance between the stern with the tide point. Fortunately the launching slipway was initially constructed in the light of Evergreen team’s design, so the calculation of launching start point came to be easier. Finally the ship was moved forward about 30m to reach the best launching point by the control of mooring winches.
Total 64 pieces Evergreen Marine Airbags D1.5xEL18 (YT-6) were employed to launch this Bulk Carrier. And all airbags’ inner pressures were adjusted to the required value before the launch. After a simple ship launching ceremony, the workers cut off the wire ropes to release the ship. Then the Bulk Carrier went into river by riding marine airbags smoothly. Different from the traditional end-on ship launching, the “stern dipping” and “stern rising” phenomena are not obvious anymore during airbag ship launching.
Qingdao Evergreen Maritime is preparing another 55,000DWT vessel launching project which will be performed after three weeks. Keep an eye on our website www.evergreen-maritime.com to know the latest news.

Hydraulic burst test of Evergreen Marine Airbags

Hydraulic burst experiment is the ultimate test for the Marine Airbags’ performance, material, manufacturing technique and structure type. Meanwhile, Hydraulic burst test also can be used to confirm the safety working pressure. But, there hasn’t been any other manufacturers done this test with regular products because of the high cost and lacking of confidence of their airbags’ performance. Generally they employ a small size airbag to do the hydraulic burst experiment and then infer to all sizes.
At the request of research department of China Shipbuilding Industry for the amendment of CB/T3795, Evergreen-Maritime did this “Hydraulic burst test” with regular Evergreen Marine Airbags. As per the requirement of industry standard, we randomly selected three pieces D1.5xEL8m YT-6 type Evergreen Marine Airbags to do the bursting test orderly under the same condition.

The result is as follows:
For the first Marine Airbags, the Hydraulic bursting pressure is P1= 0.73 MPa
For the second Marine Airbags, the Hydraulic bursting pressure is P2=0.71Mpa
For the second Marine Airbags, the Hydraulic bursting pressure is P2=0.72Mpa
Thus, the average bursting pressure is P= (P1+P2+P3)/3= 0.72 Mpa.

Then we select the safety working factor 6 (the industrial standard demands this factor for 4.5)
Pe = P/n= 0.72 Mpa / 6= 0.12 Mpa

Thus, we define the “Safety Working Pressure” of YT-6 type Evergreen Marine Airbags with 1.5 m diameter as 0.12 Mpa. For airbags with other diameter sizes, we did the same Hydraulic burst experiments to define the safety working pressure data.
To get more information, please don’t hesitate to contact us by sales@evergreen-maritime.com

Monday, January 25, 2010

Indonesian shipyards

From nippon.zaidan.info

 
番号 設立年 社名 活動 住所 分類
1 1981 PT. BANDAR VICTORY SHIPYARD 鋼船の造船及び修繕、沖合い施設の修繕、船舶解体 Jl. Sekupang Raya Km2.Sekupang PMDN
2 1985 PT. SUPRACO indonesia 石油钻井, Jl. Brigjen Katamso, Tanjung Uncang Non PMA/PMDN
3 1987 PT. BATAMAS JALA NUSANTARA 船舶建造、鉄骨組み立て、鉄骨処理、建設請負、メンテナンス、重機器の賃貸 Jl. Brigjen Katamso, Tanjung Uncang

4 1988 PT. BATAMS INDAH SIMPAL SHIPYARD 船舶のドッキング及び修繕 Sekupang PMDN
5 1990 PT. KACABA MARGA MARINA 船舶の修繕及び船舶、タグボート、バージの建造 Tanjung Uncang Non PMA/PMDN
6 1990 PT. PALMA PROGRESS SHIPYARD 船舶の修繕、建造、解体、FRPボート Jl. Palma Kav 1, Sagulung PMDN
7 1991 PT. NUTRANS MARITIM SERVICE 船舶の修繕 Tanjung Uncang Non PMA/PMDN
8 1991 PT. SENTOSA MULTI SHIPYARD バージの建造、船舶のドッキング及び修繕 Tanjung Uncang PMA
9 1992 PT. JAYA ASIATIC SHIPYARD バージの建造、船舶のドッキング及び修繕 Jl. Brigjen Katamso, Km6, Tanjung Uncang PMA
10 1993 PT. KUNANGAN MARINDO LAKSANA 船舶の修繕、バージ及びタグボートの建造、機械工場 Jl. Brigjen Katamso, Km6, Tanjung Uncang Non PMA/PMDN
11 1993 PT. NANINDAH MUTIARA SHIPYARD 船舶の修繕、建造、改造 Jl. Brigjen Katamso, Tanjung Uncang PMA
12 1994 PT. PAN ISLAND SHIPYARD バージの建造、船舶の修繕 Tanjung Uncang PMA
13 1994 PT. PIONEER OFFSHORE ENTERPRISES SHIPYARD 沖合い施設の建設、船舶の修繕、バージの建造 Tanjung Uncang PMA
14 1995 PT. SHOPIDAK SHIPYARD 海運請負、沖合い鉄骨組み立て、配管 Tanjung Uncang Non PMA/PMDN
15 1995 PT. PANDAN BAHARI SHIPYARD バージの建造、船舶のドッキング及び修繕 Jl. Brigjen Katamso, Tanjung Uncang PMA
16 1996 PT. ASL SHIPYARD INDONESIA バージの建造、船舶のドッキング及び修繕 Jl. Brigjen Katamso, Tanjung Uncang PMA
17 1996 PT. WANAMAS PUSPITA バージの建造、船舶の修繕 Tanjung Uncang PMA
18 1996 PT. PAN JAYA バージの建造、鉄骨の建設、船舶の修繕 Tanjung Uncang PMA
19 1996 PT. TERAOKA BATAM バージの建造、船舶のドッキング及び修繕 Tanjung Uncang PMA
20 1996 PT. SHINTAI INDUSTRI SHIPYARD データなし Tanjung Uncang PMDN
21 1996 PT. SHIPINDO RAYA 船舶のドッキング及び修繕 Tanjung Uncang PMDN
22 1997 PT. JAN SANJAYA PUSAKA 船舶の修繕、鉄骨の建設 Tanjung Uncang Non PMA/PMDN
23 1997 PT. SEKIP HILIR SHIPYARD アルミニウム製旅客船、タグボート、ボントゥーン、船舶のドッキングおよび修繕 Tanjung Uncang Non PMA/PMDN
24 1997 PT. BATAM TANJUNG UNCANG SHIPYARD 船舶の修繕、バージの建造、海運請負、沖合い鉄骨建設 Tanjung Uncang Non PMA/PMDN
25 1997 PT. TRIKARYA ALAM 造船業 Tanjung Uncang PMA
26 1997 PT. PAN UNITED SHIPYARD INDONESIA 船舶の建造及び修繕 Jl. Brigjen Katamso, Tanjung Uncang PMA
27 1997 PT. DEV INTERNATIONAL SHIPBUILDER 船舶の建造及び修繕、舶用エンジン及び重機器の修繕及びメンテナンス Tanjung Uncang PMA
28 1997 PT. KARLY ENGINEERING & CONSTRUCT10N INDONESIA 鋼構造物の建設及び船舶の建造 Tanjung Uncang PMA
29 1997 PT. KUNANGAN ASIPAC MARINE 船舶の建造及び修繕 Tanjung Uncang PMA
30 1997 PT. PAN BATAM ISLAND SHIPYARD バージの建造及び船舶の修繕 Tanjung Uncang PMA
31 1998 PT. BANDAR SAMAK SAGULUNG 船舶の建造及び修繕 Tanjung Uncang Non PMA/PMDN
32 1998 PT. FASECO BATAMARIN 船舶の建造、修繕、設計 Tanjung Uncang Non PMA/PMDN
33 1998 PT. TAKWINDO BATAM 船舶の修繕、バージ及び海洋機器の製造 Tanjung Uncang Non PMA/PMDN
34 1998 PT. SHL MARINA BATAM 船舶及びバージの修繕、エンジニアリング請負 Tanjung Uncang Non PMA/PMDN
35 1998 PT. GLORY UTAMA INDONESIA SHIPYARD バージの建造、船舶の建造及び修繕 Tanjung Uncang PMA
36 1999 PT. CESINDO NUSANTARA 船舶の建造請負 Tanjung Uncang Non PMA/PMDN
37 1999 PT. DUNIA MARINDO バージの修繕 Tanjung Uncang Non PMA/PMDN
38 1999 PT. ENSURE ENGINEERING バージの建造、鋼構造物の建設 Tanjung Uncang Non PMA/PMDN
39 1999 PT. ESPRIT ENGINEERING バージの建造及び船舶の修繕 Tanjung Uncang PMA
40 PT. BRITOIL OFFSHORE INDONESIA 船舶及びバージのドッキング及び修繕 Jl. Teuku Umar PMA
41 PT. LUO SHIPYARD バージの建造及び船舶の修繕 Tanjung Uncang PMA
42 PT. RIAU PAN JAYA バージの建造及び船舶の修繕 Tanjung Uncang PMA
43 PT. SABANG RAYA INDAH 船舶の建造及び修繕 Tanjung Uncang PMDN

Monday, January 18, 2010

Airbag Launching System Frees Ship From No-Fixture Ramp

Evergreen Shipping Supplies Co. Ltd. (Qingdao, China) recently announced that it successfully launched a new-build 20,000-deadweight-tonnage ship from a no-fixture ramp with its airbag launching system in Jiangsu province, China.

The 150-meter-long by 21.6-meter-wide cargo ship was built on a 200-meter-long concrete ramp without a fixture or anchor block. The angle of the concrete ramp was 0.86 of a degree. The inland river on which it sat was 350 meters wide with water depths of seven to 11 meters, and the distance between the ship stern and the end of the ramp was 15 meters. Because there was no anchor block on the ramp, no winch was available, Evergreen representatives said. The main challenges of the project were starting the ship launch and keeping the ship from slipping when moving it off the wooden blocks, they continued.

In a low tide period, the river was dredged and sandbags were placed to fill pits in the riverbed, Evergreen representatives explained. Thirty-four marine airbags 1.5 meters in diameter and 18 meters long were placed between wooden blocks according to a computer-simulated calculation, they continued. The airbags were inflated in such a way as to limit the ship’s slipping to a maximum of 0.57 of a degree when raised, Evergreen said.

Airbags were inflated from the stern to midship, one after the other, until the center of gravity was exceeded, Evergreen said, and further inflation from bow to midship lifted the entire ship. According to Evergreen, after all supporting wooden blocks were removed, airbags at the bow were deflated to adjust the ship’s gradient angle to 0.45 of a degree, which would make the ship safer from any unexpected slipping.

As the tide rose, airbags were inflated and deflated to keep the ship’s gradient angle at 0.57 of a degree, Evergreen said. An excavator grab, with its shovel wrapped in tires, was used to push the bow, the company said. After two pushes, the ship started to move slowly by riding the rolling airbags, and the movement was self-accelerated until the stern floated because of the ship’s increasing gradient angle, the company continued. It took 62 seconds from the start of the ship’s movement to total float, while the preparation took more than 12 hours, according to Evergreen.

The company said the main instruments of its airbag launching system are marine airbags, air compressors and regular winches. The sausage-shaped marine airbags are made up of rubber layers with rubber-dipped synthetic-tire-cords as reinforcement material. They have one to two-meter diameters and are six to 20 meters long. One marine airbag 1.5 meters in diameter and 18 meters long can hold more than 200 tons, Evergreen representatives said. For more information, visit http://www.evergreen-maritime.com.